Epifanes Epoxy Filler 1500

A very strong two-component light-weight filler based on epoxy resins. Chemical and water resistant, shrink-free and low odor. Can fill up to 1.5 cm in one single application.

Prior to use, stir each component separately and then thoroughly together until color is uniform. Do not use under 60°F./12°C. Best sandable properties are between 24 and 48 hours.

Application

Fiberglass – Steel – Wood – aluminum: in two-component epoxy systems above and below the waterline. Smaller repairs may also be topcoated with one-component primers/ topcoats. Larger repair areas should always be topcoated with two-component Poly-urethane. May be followed by a one-component finish if desired.

Remarks: Filled areas must be well degreased with Epifanes Spraythinnerfor Paint and Varnish. This will prevent clogging of grease in thesandpaper and will ensure a better bonding. Follow by sanding with 120.

For more specific application guidance, please refer to the Product Datasheet.